大主宰,穿越小说完本,欢乐颂第二季

Prompts specially:

　　　1. On this test system electrode (short electrode) is a positive electrode, gets down electrode (to be expandable) is
&nbsp; 
             the cathode.

　　　2. When test clearly recognized the battery cathode, does not have to meet with the measuring head instead;

　　　3. Tests electrode to have to be good with the battery contact, must clamp the battery,(clamps the degree is: The

              cathode is compressed 2-3mm then);

　　　4. Installs after when the battery should use the battery cathode to press first cathode contacts again the positive

             electrode!
　　　
　　　5. When takes the battery, should not pull out the battery directly, in order to avoid the damage measuring head,

             should compress the cathode head first, lets the battery positi ve electrode and positive electrode escapes To after,

            then takes down the battery!

　　　6. This system examination flow is five labor steps, cannot increase, the fifth labor step after the sufficient electrician

              step (for electric discharge battery supplemented electric quantity) this labor step only might establish the

              magnitude of current (only to carry out constant flow charge) the time is 100 minutes, the voltage is 4.2V, the time

　　　　 value and the voltage value already establishes by the procedure, could not change, when tested other low voltage

              batteries had the artificial control its duration of charging. This labor step when charge only demonstrated the

              battery the real-time voltage and the magnitude of current, did not demonstrate supplemented capacity. Like only

              needs two labor step to carry on the test, then from third step starts to move, from when third step starts the

              movement, the first two labor step are automatically withdrawn from,does not participate in the work, but still

              demonstrated when the flow sheet),the hypo thesis time system automatic knock off, like only needs a labor step

              carries on the test,then from fourth step starts to move, after the hypothesis time movement finished the system

              automatic knock off.

　　　7. Must carry on the capacity test and the minute allows to work, suggested last the labor step establishes in the flow

             establishment for puts the electrician step, because discharges measured to the capacity parameter is the battery

             true capacity parameter, when the charge examines to the capacity is not worth taking the battery the true

             capacity. (Electric discharge tests to capacity senate value is most real)!

　

　Exception Handle ：

　　1. If the LCD isn’t displaying or shining, be sure the power supply on and the fuse tube fixed.

　　2. Please check whether the battery is properly settled, eligible (damaged) or shed of downlead of the pole if no voltage

or current in some channel.

　　3. The red indicator in some channel doesn’t work. Check the indicator. If damaged, replace it with the same model.

　　 4. Please contact us with any questions or technical support needs.

Add: U Building, Jingtie Industrial Area,No.49 Changjiangpu Road, Henggang Street, Longgang District, Shenzhen, Guangdong,China

TEL:0755-61214283 61214285 28995730 28992831 FAX:0755-61214282